Schneider Electric Section 04 : 4-7

PowerLogic™ www.powerlogic.com ION8650/7550/7650 Power and Energy Meters ION8650/7550/7650 Power and Energy Meters The web-enabled PowerLogic ION8650 is used to monitor electric distribution networks, service entrances and substations. It enables businesses to manage complex energy supply contracts that include power quality guarantees. Low-range current accuracy makes it ideal for independent power producers and cogeneration applications that require the accurate bi-directional measurement of energy. It is well suited to load curtailment, equipment monitoring and control and energy pulsing and totalization applications. Integrate it with PowerLogic ION EEM enterprise energy management software, PowerLogic ION Enterprise operations software or other energy management and SCADA systems. PowerLogic ION8650 Power and Energy Meter Features Feature set C includes: • • 9S, 35S, 36S socket and switchboard cases True RMS 3-phase voltage, current, power and meets stringent ANSI revenue metering standards including ANSI C12.20 0.2 and Class 2, 10, & 20 Power quality: sag/swell, individual, even, odd, total harmonics to the 31st and symmetrical components 32MB log/event memory, min/max for any parameter, historical logs up to 64 channels, timestamp resolution to 0.001 seconds and GPS time synchronization Transformer/line loss compensation and Instrument transformer correction Communications: Ethernet, Serial, Modem, Internet and Ethernet to serial gateway and ION, DNP 3.0, Modbus RTU, Modbus TCP, MV-90 protocols, IEC 61850 Dial-out capability when memory is near full Multi-user, multi-level security with control and customized access to sensitive data for up to 16 users Data push capability through SMTP (email) 65 setpoints — math, logic, trig, log, linearization formulas • • Password protection and anti-tamper seal protection Built-in I/O: 4 KYZ digital outs and 3 form A digital ins, 4 KYZ digital outs and 1 form A digital out and 1 form A digital in, an optional external I/O expander provides additional I/O Feature set B adds the following to feature set C: • Harmonics—individual, total even, total odd up to the 63rd • 64MB standard memory • Historical logs up to 320 channels • Modbus RTU Master on serial ports • Cycle setpoint minimum response time Feature set A adds the following to feature sets C and B: • Waveform capture up to 1024 samples/cycle, PQ compliance monitoring, flicker to EN50160, IEC 61000-4-7/4-15 (also configurable to IEEE 519-1992, IEEE159, SEMI) CBEMA/ITIC Transient detection to 6517µs at 60Hz; Harmonics: magnitude, phase and inter-harmonics to the 50th 128MB standard memory Max 96 cycles of waveform logs and 800 channels of historical logs • • • • • • • • • • • • Table 4.3: Typical PowerLogic ION8650 Power and Energy Meter Ordering Configurations Catalog No. S8650A0C0E6E0B0A S8650A1C0E6E0B0A S8650C0C0E6A0B0A S8650C1C0E6A0B0A $ Price 7077.00 7077.00 2889.00 2889.00 Description ION8650, feature set A, 9S socket base, 5 A nominal current inputs, 10MB memory, 127–177 Vac, 60 Hz, communications card with: 10BaseT, RS-232/485, RS-485, Optical port, 4 Digital Outputs, 3 Digital Inputs ION8650, feature set A, 35S socket base, 5 A nominal current inputs, 10MB memory, 120–480 Vac, 60 Hz, communications card with: 10Base T, RS-232/485, RS-485, Optical port, 4 Digital Outputs, 3 Digital Inputs ION8650, feature set C, 9S socket base, 5 A nominal current inputs, 2MB memory, 120–277 Vac, 60 Hz, communications card with: RS-232/485, RS-485, Optical port, 4 Digital Outputs, 3 Digital Inputs ION8650, feature set C, 35S socket base, 5 A nominal current inputs, 2MB memory, 120–277 Vac, 60 Hz, communications card with: RS-232/485, RS-485, Optical port, 4 Digital Outputs, 3 Digital Inputs PowerLogic ION7550 and ION7650 Power and Energy Meters Used at key distribution points and sensitive loads, the web-enabled PowerLogic ION7550 and PowerLogic ION7650 meters combine a wealth of advanced features from power quality analysis capabilities, revenue accuracy and multiple communications options, through web compatibility, and control capabilities. Both are compatible with PowerLogic ION EEM enterprise energy management software, PowerLogic ION Enterprise operations software can be integrated with other energy management or building control systems through multiple communication channels and protocols. The meters are ideal for compliance monitoring, disturbance analysis, cost allocation and billing, demand and power factor control and equipment monitoring and control. The meters have a high visibility, adjustable front panel display that can depict TOU, harmonics, event logs, phasers, and instantaneous power parameters. They meet stringent ANSI C12.20 0.2, Class 10 & 20 revenue metering standards. PowerLogic ION7550 and ION7650 Power and Energy Meter Features The PowerLogic ION7550 includes: • • • • 3.5” x 4.5” (87 x 112 mm) backlit LCD display True RMS 3-phase voltage, current, and power that meets stringent ANSI C12.20 0.2, Class 2, 10, & 20 Power quality: sag/swell, harmonics -individual, even, odd, total to the 63rd, waveform capture at 256 samples/cycle 5MB log/event memory (10MB optional), waveform logging up to 96 cycles, up to 800 channels historical, min/max, timestamp resolution to 0.001 seconds, GPS time synchronization and historical trends through front panel Communications: fiber, Ethernet, serial, internal modem, optical port, and a gateway functionality, ION, DNP 3.0, Modbus RTU -master & slave, Modbus TCP, MV-90, and IEC 61850. IEC 61850 only available with 5MB memory and Ethernet options Dial-out capability when memory is near full Data push capability through SMTP (email) • Multi-user, multi-level security with control and customized access to sensitive data for up to 16 users • 65 configurable 1/2 cycle setpoints for single, multi-condition and dial out on alarm and math, logic, trig, log, linearization formulas • Password protection and anti-tamper seal protection enhance meter security • Extensive standard I/O includes: 8 digital inputs, 4 digital outputs and 3 onboard relays The ION7650 has all the features of the ION7550 and adds: • • • • • • Waveform capture up to 1024 samples/cycle Transient detection to 17µs at 60Hz Harmonics: magnitude, phase and inter-harmonics to the 40th Flicker to EN50160 and IEC 61000-4-7/4-15 (also configurable for IEEE 519-1992, IEEE159, SEMI), plus CBEMA/ITIC Symmetrical components Power quality measurements per IEC 61000-4-30 Class A, Ed. 2 • • • Description Catalog No. $ Price Typical PowerLogic ION7550 Power and Energy Meter Ordering Configurations Integrated display, with 256 samples/cycle, 5 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port) plus Ethernet, standard I/O Integrated display, with 256 samples/cycle, 5 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port), standard I/O S7550A0C0B6E0A0A S7550A0C0B6A0A0A 6318.00 5589.00 Typical PowerLogic ION7650 Power and Energy Meter Ordering Configurations Integrated display, with 1024 samples/cycle, 10 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port) plus Ethernet, standard I/O, EN50160 compliance monitoring Integrated display, with 512 samples/cycle, 5 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port) plus Ethernet, standard I/O Integrated display, with 512 samples/cycle, 5 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port) plus Ethernet and 56k modem, standard I/O Integrated display, with 512 samples/cycle, 5 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port), standard I/O Integrated display, with 1024 samples/cycle, 10 MB logging memory, 5 A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 optical port) plus Ethernet, standard I/O Note: Please refer to powerlogic.com for the most complete and up-to-date list of feature availability. Some features are optional. © 2012 Schneider Electric All Rights Reserved S7650B1C0B6E0A0E S7650A0C0B6E0A0A S7650A0C0B6C1A0A S7650A0C0B6A0A0A S7650B1C0B6E0A0A 9279.00 7869.00 8409.00 7140.00 9279.00 PM1 Discount Schedule 4-7 4 POWER MONITORING AND CONTROL Table 4.4: Typical PowerLogic ION7550/7650 Power and Energy Meter Ordering Configurations

Previous Page  Next Page


Publication List
Using a screen reader? Click Here